Mishimoto Front Mount Intercooler Silver
This is NOT product that is onroute to us already, it must be ordered from us, once you order, we will order from supplier that has the stock and the availability as listed on the product description.
This displayed ETA is still an estimation. Our supplier(s) have stock we're giving you the regular and typical ETA from that supplier.
If you're ordering a higher quantity then the quantity shown, please email us at email@example.com with the SKU or direct link and the quantity you're interested and we will confirm lead time.
Mishimoto WRX/STI Front-Mount Intercooler Kit will provide your Subaru with the ability to
make the most horsepower and torque possible. This front-mount intercooler was
designed with a large, 28" intercooler core that provides the maximum cooling capability
without excessive pressure drops that will wear out any turbocharger over time. The
intercooler features smooth cast end tanks that are CFD tested for maximum airflow
with no sharp walls or bends from cut-and-weld end tanks that disrupt airflow. The
intercooler provides the best airflow and heat exchange properties for those time-attack
laps, or a 10-second blast down the quarter mile. The Mishimoto Subaru WRX/STI
Front-Mount Intercooler also features four mandrel-bent aluminum pipes for optimum
airflow. The hot-side pipes are 2.25" in diameter to keep airflow velocities high, giving
your car instant response without excessive throttle lag that plagues many front-mount
intercooler designs. The cold side of the system features 3" mandrel-bent aluminum
tubing designed for maximum airflow and to match the diameter of your throttle body. The kit is compatible with both stock and aftermarket bypass or blow off valves. The kit contains
everything needed for a worry-free installation, including an application-specific crash bar
that both supports the intercooler and mounts to existing points on the vehicle. No cutting
or drilling is required to install the crash bar and intercooler. The kit also includes all
necessary mounting brackets, including a resistor block relocation bracket to move the
resistor block out of the way of the intercooler piping. All mounting brackets will come
with applicable hardware, zip ties, and thermal wrap. The kit also includes every coupler
and clamp needed for a clean install. For larger-than-stock turbos, Mishimoto has
included a larger turbo hot-side pipe that will fit turbochargers.
|2007||Subaru||Impreza||WRX STI Limited|