Parts Finder Main (New)

FT-86 SpeedFactory V1 Cat Back Exhaust (Resonated) - 2013+ BRZ

CA$1,182.99
SKU
FT86SFEXHV1-RES
This is the best exhuast system out there for the Subaru BRZ period!
 
This is the best exhuast system out there for the Subaru BRZ period! We set out to make one of the highest quality systems available that was simple and had a great sound. We have a single piece mid pipe section that is mandrel bent as needed and one of the straightest available. A V-Band clamp was used to attach the axle back portion for ease of install, and future V2 (right side single exit) and V3 (no muffler single exit) upgrade options. You hear the exhaust when you want to, by letting the RPM's wrap out with your foot firmly on the floor, and don't hear it when cruising at 3000 RPM down the highway. It is also not overly loud when shifting normally on your morning commute to work. To keep the ruckus down during normal driving we had to use a heavier muffler. Testing showed us that the lighter mufflers increased noise in the RPM ranges for daily commutes and is not something we wanted in our V1 system. We will have lighter exhausts for our V2 and V3 due out later this year. The number one goal for the V1 is sound and daily drive-ability, and I firmly believe that has been accomplished here. Features 2.5" T304 Stainless Pipe T304 Stainless Muffler Minimal bends, as straight as possible 4" Stainless Angle Cut tips Made in the U.S.A (Iowa to be exact.) V-Band Clamp for rear section Up to a 7 Wheel HP Gain in the RPM range Up to a 3 FT LB in Torque Gain in the RPM range Lighter than stock exhaust system Fits both manual and automatic BRZ cars Doesn't annoy the Girlfriend / Wife LIFETIME WARRANTY FOR ORIGINAL OWNER REV with Stock Front Pipe Dyno with Stock Front Pipe In Car with Stock Front Pipe Drive By with Stock Front Pipe Stationary Rev with Invidia Catless Front Pipe Drive By with Invidia Catless Front Pipe In Car with Invidia Catless Front Pipe Customer Video - Invidia Catless Front Pipe and our exhaust Customer Video - Stock except for the V1: This Part Fits 2013+ Subaru BRZ FT-86 SpeedFactory V1 Cat Back Exhaust (Resonated)
Write Your Own Review
You're reviewing:FT-86 SpeedFactory V1 Cat Back Exhaust (Resonated) - 2013+ BRZ

Fitments

Year Make Model Submodel
2017 Subaru BRZ Limited
2017 Subaru BRZ Premium
2016 Subaru BRZ Limited
2016 Subaru BRZ Premium
2016 Subaru BRZ Series Hyper Blue
2015 Subaru BRZ Limited
2015 Subaru BRZ Premium
2014 Subaru BRZ Limited
2014 Subaru BRZ Premium
2013 Subaru BRZ Limited
2013 Subaru BRZ Premium