Parts Finder Main (New)

FT-86 SpeedFactory Race Unequal Length Header - 2013+ BRZ

CA$1,008.49
SKU
FT86CTLSHDR
FT-86 SpeedFactory's Race UEL header is ready to get rid of that notorious torque dip that plagues the Scion FR-S and Subaru BRZ. Made in the USA from 304 Stainless steel and tig welded at every corner.
Got a single exit exhaust on your Scion FR-S, Subaru BRZ, or Toyota GT86 and hate that empty hole look? We have made a cover / block off for open hole. Made from 22 a FT-86 SpeedFactory's Race UEL header is ready to get rid of that notorious torque dip that plagues the Scion FR-S and Subaru BRZ. Made in the USA from 304 Stainless steel and tig welded at every corner. The exhaust runners are 1.75" in OD and flow into a 4 to 1 merge collector that exits into a 2.5" OD outlet which mates to the factory over pipe or any aftermarket over pipe that is in the factory location. The stock under tray will bolt right back up after instillation making sure you can still protect the cars underbelly as well. You will need a CEL spacer or a EcuTek tune in order to not have a check engine light. Or you can could also pick up our catted UEL header for a simple plug and play type of install that gains 18ft lb of torque and 12HP in the infamous "dip". Peak power is up 14HP and 5ft lbs of torque with no tuning yet. Unlock even more with a tune. Includes OEM Subaru Metal 2.5" Gasket for Overpipe section Grimmspeed Header gaskets Two Bolts and nuts. Laffy Taffy A lifetime warranty (original owner only) against cracks or other defects in metal and weld quality. Each header is built to order. Due to the hand made nature of this header lead times can vary depending on current work load. Upon order you will be given an estimated shipping date. We do our best to stick as close as possible to these. Parts in Video FT-86 SpeedFactory Catless UEL Perrin Over Pipe Invidia Resonated Front Pipe Tomei Type 80 Exhaust Please contact us for current delivery times. This Part Fits 2013+ Subaru BRZ FT-86 SpeedFactory Race Unequal Length Header gauge cold rolled steel, laser cut, formed and then powder coated to stand up to the elements. Easy install with three self tapping screws to attach to the underside of the bumper. Screws will self tap into a non visible area so when you go back to dual exhaust it will still look factory. Note: Does NOT fit the 2017 model. This Part Fits 2013+ Subaru BRZ FT-86 Passenger Side Exhaust Delete
Write Your Own Review
You're reviewing:FT-86 SpeedFactory Race Unequal Length Header - 2013+ BRZ

Fitments

Year Make Model Submodel
2017 Subaru BRZ Limited
2017 Subaru BRZ Premium
2016 Subaru BRZ Limited
2016 Subaru BRZ Premium
2016 Subaru BRZ Series Hyper Blue
2015 Subaru BRZ Limited
2015 Subaru BRZ Premium
2014 Subaru BRZ Limited
2014 Subaru BRZ Premium
2013 Subaru BRZ Limited
2013 Subaru BRZ Premium