FT-86 SpeedFactory Catted Unequal Length Header - 2013+ BRZ

FT-86 SpeedFactory's Catted UEL header is ready to get rid of that notorious torque dip that plagues the Subaru BRZ. Made in the USA from 304 Stainless steel and tig welded at every corner. The exhaust runners are 1.75" in OD and flow into a 4 to 1 merge collector that exits into a 2.5" OD catalytic converter which mates to the factory over pipe or any aftermarket over pipe that is in the factory location. The stock under tray will bolt right back up after installation, making sure you can still protect the cars underbelly, as well. Our catted UEL header is a simple bolt on install that gains 18ft lb. of torque and 12HP in the infamous "dip". Peak power is up 14HP and 5ft lbs of torque with no ECU tuning. Unlock even more with a tune. No CEL, as well, for those who wish to not stare at a light on the dash. Weight Stock Header = 20.8lbs FT86SF UEL = 13.0lbs Includes OEM Subaru Metal 2.5" Gasket for Overpipe section Grimmspeed Header gaskets Two Bolts and nuts. Laffy Taffy Lifetime Warranty (original owner only) against cracks or other defects in metal and weld quality. Each header is built to order. Due to the hand made nature of this header lead times can vary depending on current work load. Current lead time is 8-10 weeks due to high demand and each header taking 9hrs to build. We do our best to stick as close as possible to these dates. This Part Fits 2013+ Subaru BRZ FT-86 SpeedFactory Catted Unequal Length Header