Radium Engineering Vapor Shield Fuel Hose

Vapor shield hose is designed specifically for high performance fuel injection systems. Unlike standard fuel hose that degrades with alternate fuels, this hose is resistant and compatible with gasoline, diesel, biodiesel, 100% methanol, and all ethanol blends including E85. Furthermore, the hose has a thermoplastic armor layer that guards against unwanted vapor permeation fuel odor. And unlike PTFE, this fuel hose has an improved bend radius, as specified below. This hose is compatible with barbed fittings fastened with hose clamps. Meets EPA and CARB requirements. For in-tank submersible fuel hose go HERE. SPECIFICATIONS Tube: Hydrogenated Nitrile Butadiene Rubber (HNBR) Vapor Barrier: Thermoplastic Reinforcement: Aramid Fiber Cover: Black Chlorinated Polyethylene Temperature Range: -40F to 275F Standards: SAE 30R14 Type 2, CARB, EPA Made in USA 5/16" Vapor Shield Hose, 5AN Inside Diameter: 0.3125" (7.9mm) ID Outside Diameter: 0.56" (14.3mm) OD Working Pressure: 225-psi maximum Burst Pressure: 1,125-psi mimimum Bend Radius: 2.95" minimum 3/8" Vapor Shield Hose, 6AN Inside Diameter: 0.375" (9.5mm) ID Outside Diameter: 0.62" (15.9mm) OD Working Pressure: 225-psi maximum Burst Pressure: 1,125-psi mimimum Bend Radius: 3.35" minimum HOW TO ORDER: First select the hose I.D. that you need from the radio buttons. Next, enter the amount of feet you want in the Quantity box. You must round to the nearest foot (decimals not allowed). Units Conversion: 1ft = 12in = 30.5cm = 305mm Examples Quantity: 1, Radium will provide 1 foot of hose in the size you have selected. Quantity: 6, Radium will provide 6 feet of hose in the size you have selected.