Parts Finder Main (New)

Perrin Performance Equal Length Header 1.625" Primaries "Big Tube" 02-14 WRX 04-20 STI

CA$1,814.54
SKU
PSP-EXT-056

Create a smooth-sounding exhaust note while increasing horsepower and torque with the PERRIN Equal Length Header. Available in both Standard 1.5" or 1.625" Big-Tube Primaries.

Designed for Power
The PERRIN Equal Length Header comes with collectors that have been designed for better exhaust flow while allowing the headers to be constructed with increased accuracy. The improved exhaust flow and more precise construction increase power and reliability, while the low-profile design allows for excellent ground clearance.

No Tuning Required
Increase horsepower and torque without ECU recalibration or tune! This part is designed and tested to work safely on your vehicle without any tuning required! However, more power can be gained with proper ECU tuning! Confirm any tune or recalibration you add is specific for ALL modifications added to the vehicle.

Equal Length Design
The equal length design of the PERRIN Header produces smooth, balanced exhaust flow from the heads to the turbocharger giving you the best of two worlds: quicker turbo response as well as more horsepower and torque throughout the entire RPM band. While designed to fit the factory up-pipe, our header will also mate with an aftermarket up-pipe that fits the factory header and turbo, as well as any rotated turbo kits compatible with the factory header.

Perfectly Sized for More Horsepower
You won't see grossly over-sized tubing to make our header "look" impressive, this just slows exhaust gas flow and reduces response. PERRIN headers use 1½" and 1⅝" (big-tube) primary tubing that is expanded at the flange to fit the Subaru exhaust port size. These tubing sizes are perfectly designed for cars up to about 400 wheel horsepower and above 400 wheel horsepower, respectively. You can see from our dyno graphs that there is a significant gain in horsepower and torque across the entire RPM band compared to an OEM Subaru header.

Flanges & Port Matching
PERRIN Flanges are CNC machined from 304 stainless steel and counterbored on the backside to make smoother transitions. Flange ports are sized properly to ensure exhaust coming out of the head has a smooth, unobstructed path to the tubes. The ports are not over-ported which would cause gaskets to burn out quickly. The tubes are expanded inside the flanges for a perfect fit and smooth flow of exhaust gases to the tubes.

Sound
Due to its equal length design, the PERRIN Header will alter the tone of your exhaust. The exhaust pulses from the engine are equalized and spread out producing a smoother, more refined sound. A byproduct of the equalization is a significant reduction in the volume of your exhaust sound. Some describe the sound as being similar to an inline four cylinder engine exhaust.

Finish
PERRIN Equal Length Headers feature a brushed stainless steel finish.

Oil Pan
Most headers collect on the passenger side of the engine, and due to space constraints, are not equal length and compromise exhaust flow. Because we use the added room provided by the oil pan (only on 2.5L turbo pans), we can create a smooth transition of the header primaries to the collectors, and collectors to up-pipe, providing more power and torque then the competition.
2.0L WRX engines will need the 2.5L STI oil pan install kit.

Specs
Material 304 Stainless steel
Finish Brushed
Outer Diameter - Normal 1½"
Outer Diameter - Big Tube 1⅝"

P/Ns
PSP-EXT-055 - Equal Length Headers
PSP-EXT-056 - Big Tube Headers

In The Box
PSP-EXT-056:
(1) PERRIN E4-Series Header
(1) Anti-seize grease packet
(1) PERRIN License Plate Frame
Warranty & Instructions

Compatibility
2002-2014 Subaru WRX
2004-2021 Subaru STI
2005-2009 Subaru Legacy GT & Outback XT
2004-2013 Subaru Forester XT
NOTE:
2002-2005 WRX - Yes, requires oil pan with header cutout and oil pickup tube
2002-2005 WRX Automatic Transmission - Yes, requires modifications to radiator and radiator line to the transmission
2006-2007 WRX - Yes, requires 2002-04 WRX oil cooler assembly and oil feed pipe
2004-2008 Forester XT - Yes, requires oil pan with header cutout, oil pickup tube, 2002-04 WRX oil cooler assembly, and 2002-04 WRX oil feed pipe
CSF Radiator with Built-in Oil Cooler - No
KILLERB Cast Oil Pan - No

Write Your Own Review
You're reviewing:Perrin Performance Equal Length Header 1.625" Primaries "Big Tube" 02-14 WRX 04-20 STI

Fitments

Year Make Model Submodel
2014 Subaru Impreza WRX STI Limited Hatchback
2012 Subaru Impreza WRX STI Limited Sedan