CX Racing Turbo Manifold Header Intercooler Piping Kit For 97-03 Ford F150 4.6L V8 NA-T

CXRacing Turbo + Intercooler Kit for 10th Gen 1997-2003 Ford F150 4.6L V8 NA-T 

This Kit Is Developed Based on a 4x4 Chassis, It Should Fit the RWD As Well.

This Is Our Innovated Design for F150, No Cut, Bolt On Fitment and Makes Big Power.

- T76 Big Turbo, Supports 600 HP
- 60mm Vband Wastegate
- 3" Turbo Downpipe
- 2.5" Header Cross Pipe
- 50mm BOV
- Bolt On Fitment, Comes with Brackets to Mount Intercooler
- 4" Core Intercooler
- 3" Intercooler Piping Kit
- Keeps All Stock Parts, A/C etc

Notes:
1. Need to Work On the Exhaust System to Connect to the Downpipe (Due to Many Exhaust Options, The Downpipe Is NOT Connected to Stock Exhaust).

2. This Kit Is For Turbo Hardware ONLY, You Will Need to Upgrade Engine's Fuel System and Tune the Engine. Needs to Upgrade Engine Internal Parts If Running Higher than 6 PSI Boost.

3. Installation Guide Is Available on CXRACING's Website.


Application:
- Chassis: 1997-2003 Ford F150 4X4
- Motor: 4.6L V8 NA-T
- Turbo: T76, 0.81 AR Exhaust Housing

Product Being Sold:
T76 Turbo + Headers/Manifolds + Cross Pipe/Downpipe + Wastegate + Intercooler + Pipes + Silicon Hoses + T-Clamps + BOV + Brackets + Air Filter + Radiator Fan Shroud and Fans + Radiator Hard Pipe Kit

This is CXRacing's Newest Products for the Application Stated Above. All Parts Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for Improved Performance Gains, with Excellent Fitment and Easy Installation.


Product Info and Spec:
Headers/Manifold：
- 304 Stainless Steel Headers, 1.65" Runners
- 2.5" Cross Pipe
- Bolt On Fit, No Need To Cut or Relocate Other Parts

T76 Turbo and Wastegate：
- 4" Air Inlet, 2.5" Compressed Air Outlet
- Wet Floating Bearings
- Oil Cooling
- Standard T4 Flange
- 76mm Wheel Compressor
- P Trim .81 A/R Turbine
- 3" V-band Hot Side
- 60 mm V-band 12 Psi Wastegate

Intercooler：
- Bar and Plate Design
- Core Size: 18"x12"x4"
- Overall Size: 24"x12"x4"
- 4" Thick Core, 2.5" Inlet & Outlet
- Intercooler Comes with Aluminum Brackets

Aluminum Piping Kit:
- 2.5" Hot Side and 3" Cold Side Mandrel Bent Aluminum Piping Kit
- 50mm BOV, Silicon Hoses and Clamps

Radiator Shroud and Fan:
- Aluminum Fan Shroud and 2x 14" Fan, Clears Front Space to Fit Turbo and Cross Pipe
- Comes with 1.5" Radiator Hard Pipe Kit, Fits Stock Radiator

Notes:
- Off Road Or Track Use ONLY, NOT For Street Use.
- Due To the Complexity of Converting a Motor From NA to Turbo, Please Make Sure You Understand the Application Stated Here is the Right Parts For Your Project.
- Parts Being Sold are the Kit Being Advertised ONLY. Other Parts Shown on Pictures are for Demo Only (of Our Complete Swap Kit). Check Our Other Website Items.

Optional One Dual Ball Bearing Turbos is Available with $250 Extra, Please Select the Ball Bearing Option When Buying.