Parts Finder Main (New)

Velox Full Brake Cooling Kit FR-S / BRZ / GT86

CA$625.43
A well thought out and executed brake cooling kit which installs in an OEM type format with an emphasis on shortest route possible, maximizing cooling, and increasing the brake's ability to do their job by keeping them at a more reasonable temperature.
A well thought out and executed brake cooling kit which installs in an OEM type format with an emphasis on shortest route possible, maximizing cooling, and increasing the brake's ability to do their job by keeping them at a more reasonable temperature. Using the OEM fog lights as the inlet to the kit and a well formed duct in the inner fender line this is the brake cooling kit to have. At the knuckle the stainless backing plate and well formed carbon duct direct cool air into the center of the rotor to maximize cooling benefits. Kit comes with everything necessary for an install, including pre-cut hoses to length.
OEM or similar fog light bezel is necessary for a seamless install. Winjet sells these for FR-S for $20 for both sides, Subaru sells these for the BRZ for $40 for both units.
Depending on wheels/tires/suspension setup, steering rack limiters may need to be installed (included in kit).
In some severe cases backing plate may need trimmed. IE: AP sprint kit with whiteline roll center adjusters due to lower control arm to rotor clearance being less than the thickness of the backing plate. AP Sprint BBK will fit without trimming on stock ball joints.
Write Your Own Review
You're reviewing:Velox Full Brake Cooling Kit FR-S / BRZ / GT86

Fitments

Year Make Model Submodel
2017 Subaru BRZ Limited
2017 Subaru BRZ Premium
2016 Subaru BRZ Limited
2016 Subaru BRZ Premium
2016 Subaru BRZ Series Hyper Blue
2015 Subaru BRZ Limited
2015 Subaru BRZ Premium
2015 Subaru BRZ Series Blue
2014 Subaru BRZ Limited
2014 Subaru BRZ Premium
2013 Subaru BRZ Limited
2013 Subaru BRZ Premium